Why bamboo plywood have the voids?

Why bamboo panel have the voids-JULY BAMBU430

[vc_row][vc_column][vc_column_text]With the economic department and countries attach important to environmental issues,more and more people choose the sustainable material to replace unsustainable material. In furniture industry,People used bamboo plywood to instead of wood material. As we know, the livespan of bamboo just need 3 to 5 years, however the wood material at least 8 year,even 10 years.And bamboo plywood is stranger than wood and all indoor wood all can be replace by bamboo.In short,the bamboo material is best replace material.Currently,most of Europe country use bamboo panel to instead of wood. But all the people who use bamboo plywood to make furniture know that its would have voids when cut the bamboo.So why bamboo panel have these voids?and these gaps if affect the use.
1:The primary of cause is that raw material.We all know that bamboo plywood make of natural bamboo. And itself have natural sulfur and other chemical material.These chemical material attached bamboo poles with long years, would leave recess on the bamboo pole. However that bamboo panel is press layer by layer with glue, so its leads to voids in structure side.
2: as we mentioned above,bamboo is natural, there must be have good and bad material. For to maximize the utilization of bamboo, the manufacturer will produce grade C or D which the middle layer is not full solid but both surface can reach grade A or B. Usually,the grade C or D bamboo plywood use for floor, bookshelf and ceiling that not high requirements on bearing weight.

bamboo plywood

3: The third is manufacturer production equipment. Bamboo slats of bamboo plywood by cut bamboo poles. Bamboo poles is round.So after cut bamboo slats certain curvature, need sanding machine to sanding to surface and no curvature rectangle bamboo slats,then press into bamboo panel. Otherwise,the sanding material can not reach this level,also leads to gaps in structure side.
There gaps if affect bamboo panel use? In general,grade A bamboo plywood gaps cause by natural issue, the middle is solid not affect bamboo plywood use,  as for these gaps,for better perfect surface,the manufacturer use bamboo powder and other bamboo fragments to repair. The grade C or D bamboo middle is not solid and the not small gaps, Therefore, it has a certain influence on the bearing capacity. And even if to repair to the voids also need to spend lost of time and money. So these bamboo plywood use for door,floor and ceiling part. Whatever the bamboo panel is what,these bamboo plywood all can replace the wood.

Main content:the three reason of bamboo plywood have voids, one is natural bamboo slats have some natural sulfur and other chemical material and leave recess on the bamboo slats, then make the voids when press panel, another reason is material quality, the third is bamboo slats flatness. And also description these voids if affect the use.

Original:JULY BAMBU[/vc_column_text][/vc_column][/vc_row]

WordPress Image Lightbox Plugin


We will contact you within 1 working day, please pay attention to the email with the suffix “@julybambu.com”.

Ask For A Quick Quote

We will contact you within 1 working day, please pay attention to the email with the suffix “@julybambu.com”.

Ask For A Quick Quote

We will contact you within 1 working day, please pay attention to the email with the suffix “@julybambu.com”